UniStone tile adhesives are manufactured under technical collaboration with WACKER POLYMERS Germany. WACKER is one of the world’s largest and pioneer companies in the field of polymers. WACKER POLYMERS provides full technical support and product testing facilities in their state of the art laboratory in Mumbai to our company, ensuring our products meet the highest International Standards.
THE PRODUCT
Unistone Super Grout is a premium quality, single-component tile grout used in both interior & exterior applications of filling tile joints. It effectively fills the gaps and levels itself to give hard-wearing & non-dusting tile joints. It does not allow water to seep into the back of the tile preventing its dis-colouration. It is dry-mix-ready for use with the addition of water at the site.
USES
To provide smooth, water-resistant and hard-wearing tile joints in domestic and commercial establishments, malls, supermarkets and showrooms.
ADVANTAGES
High abrasion resistance.
Flexibility.
Ready to use, just add water.
PRECAUTIONS
Application of grout should commence only after a minimum of 24 hours of tile fixing.
Excess grout from the tile surface must be removed at once using a damp sponge or wet cloth.
Wait for a period of 24 hours-36 hours before opening the installation to traffic.
COLORS
Unistone Super Grout is available in 24 shades, plus black & white colour shades.
COVERAGE
It varies with the size of the tile & width of the tile joint.
PACKING
In 5 kg & 20 kg bags.
STORAGE
Store in a cool, dry place.
THE PRODUCT
Unistone Epoxy Grout is a chemical-resistant, hard-wearing, stain-free and color-fast, 100% epoxy grout for filling tile joints.
USES
It is used in chemical plants, pharmaceuticals, hospitals, laboratories, breweries and restaurants, where chemical resistance is essential. It is also used in vitrified tile flooring for its aesthetic property.
ADVANTAGES
Resistant to chemicals like acids, solvents, alkalies etc.
Stain-free & colour fast.
Beautiful, smooth & even tile joints.
PRECAUTIONS
Grouting should commence only after a minimum of 24 hours of tile fixing.
Remove excess grout from the surface of the tiles immediately, using a damp sponge or wet cloth.
Wait for a period of 24 hours-36 hours before opening the installation to traffic.
COLORS
Unistone Epoxy Grout is available in 10 colors.
COVERAGE
It varies with the size of the tile and the width of the tile joint.
PACKING
In 1 kg and 5 kg packs. [2:1:7 ratio of resin, hardener and filler]
STORAGE
Store in a cool, dry place.
Note: All Unistone Products should be used in accordance with the manufacturer’s recommendations; we can not assume responsibility when conditions of storage and use are beyond our control.
COVERAGE GUIDLINE FOR UNISTONE SUPER GROUT | |||||||
Tile Size Width of joints | 3" X 3" | 3" X 6" | 6" X 6" | 4" X 8" | 8" X 8" | 8" X 12" | 12" X 12" |
2MM | 30 | 42 | 60 | 52 | 70 | 85 | 110 |
3MM | 15 | 21 | 30 | 25 | 36 | 43 | 54 |
4MM | 11 | 15 | 23 | 20 | 28 | 32 | 40 |
6MM | 9 | 10 | 15 | 12 | 16 | 22 | 28 |
In Square Feet per Kg of Grout | |||||||
PROPERTIES | TILE ADHESIVE | REQUIREMENT AS PER EN/ANSI | ||
UNISTONE | UNISTONE | UNISTONE | ||
Tensile adhesion strength | > 2.5 | > 0.5 | > 2.0 | Minimum requirement: |
Water immersion: 7 days s.c. + | > 2.5 | > 0.5 | > 2.0 | |
Open time | > 20 min | > 20 min | > 20 min | >20 minutes as per EN 1346 |
You cannot copy content of this page
